RV Ice Box produces the
evaporator heads that go into RV Ice Box's cooling units. We have
developed the evaporators for almost every model Norcold and Dometic
cooling unit produced since the early 1980's. It really makes rebuilding a
cooling unit a snap. It does take a little time to get set up and build
all the welding fixtures necessary for each model, but RV Ice Box can even
help with that.
We have welding fixtures for every model evaporator and we
also have metal frames we put the evaporator head and cooling unit into to
make assembly easier and to assure a good fit when the cooling unit is
installed in the refrigerator box. If you are a cooling unit re-builder
interested in using the replacement evaporators in your business give us a
call, we will even invite you to spend some time at our shop to see how we
set things up. If you live in a nice warm place close to the beach, in the
winter months I may even come to your shop!
We sell the evaporator tubing in several different way, from just the plain
bent pipe on the left to the complete welded and assembled evaporators on
the right. But we also sell kits with the large pipe and the small lines
bent and the brackets pre-cut, you assemble them yourself but all the
pieces you need are there. We also have builders that prefer we bend the
large pipe and weld on just the freezer bars then they do their own small
lines and brackets. We can do it just about any way that is convenient for
you, just give us a call.